Welcome to MEIKO.
Please select a country and click "confirm".
The clean solution

K 200 M / K 260 M Rack Type Dishwashing Machine

Efficient and economical dishwashing from MEIKO

This rack-type dishwashing machine offers a single wash tank construction with washing capacity of 200 baskets per hour. Superior cleaning quality with low cost, minimum space requirements, heated with electricity, high quality and economic version, specially made for the hotels and restaurants.

The machine can also be fitted with a waste air extraction duct and fan. This ensures proper extraction of waste air into an existing air duct system or into an exhaust hood. A waste air heat recovery unit with a generous 60 m2 cooling surface provides major energy savings.  This offers a big drop in your heating energy costs as well as reducing the total connected load and operating costs. 


Punkt2 AirConcept M-iQ
Heat recovery to enhance air qualitiy and energy efficiency

Heat recovery to enhance air qualitiy and energy efficiency


Technical data - K 200 M

K 200 M
Technical data
Throughput130-200 baskets/h
Wash pump rating*1.7 kW/h
Pump throughput1020 l/min.
Tank heating13.9 kW/h
Tank capacity90 l
Final rinse water360 l/h
Rinse booster pump rating0.55 kW
Exhaust fan ratingoption
Boiler rating**16.7 kW/h
Total connected load** (drying not included)33.03 kW/h
Machine length (without dryer)1550 mm
Width510 mm
Height 450 mm

This rack-type dishwashing machine is equipped with waste air heat recovery that greatly reduces operation costs. With a pre-wash-tank and a washing capacity of up to 250 basket per hour, the K260 M offers superior cleaning quality at a low cost as well a minimum space requirements. 

Optional for the K260 M rack-type dishwashing machine is the high-efficiency, low temperature drying zones in straight or space-saving 90° angle configurations.


Technical data - K 260 M

K 260 M
Technical data
Throughput165 - 250 baskets/h
Wash pump rating*1 x 0.55 / 1 x 1.7 kW/h
Pump throughput1 x 400 / 1 x 1020 l/min.
Tank heating7.4 + 17.6 kW/h
Tank capacity140 l
Final rinse water400 l/h
Rinse booster pump rating0.55 kW
Exhaust fan rating0.11 kW
Boiler rating**20 kW/h
Total connected load** (drying not included)48.1 kW/h
Transport motor rating0.12 / 0.18 kW/h
Machine length (without dryer)2050 mm
Width510 mm
Height 450 mm

The machines are fully wired and ready for installation. They are wired for 3 NPE 400 V, 50 Hz as standard with the additional option of 3 NPE 400 V, 60 Hz. Water flow pressure: minimum 2.5 bar, maximum 6.0 bar.

* Standard configuration 1.7 kW, (3 NPE, 400 V, 50 Hz) – 2.2 kW, (3 NPE, 400 V, 60 Hz)         

** (45 °C water connection)